Pyrolysis oven Pyro Dnipro Aqua

Pyrolysis furnaces with water heating of various modifications
Are available
Ship today
Article: WD20-87
Heating Area - 35-95 m2
Pipe Diameter - mm
Number of pipes - pcs.
Mass - 220 kg.
Price: 45000 uah
  • Share this:

Specifications

Key Specifications: Pyrolysis oven Pyro Dnipro Aqua
Depth, mm, not more than* 570
Width, mm, not more than* 640
Height, mm, not more than* 1132
Weight, kg 220
Nominal performance, kW 8,7
Performance, kW 3-8,7
Heated Space, m3 ** 80-230
Fuel consumption, kg/h 2,5
Efficiency (by nominal performance), % 90,5
Flue diameter, mm  150
Max. log length, mm 285
Water heat exchanger Present
Rated power transmitted by the surface of the furnace by heat radiation, kW 3,3
Power transmitted to the water heating system, kW 5,4
Width / Depth / Height of the furnace, mm  280 / 300 / 330
Furnace volume, l  28
The volume of water in the heat exchanger, l 25
Maximum working pressure, kPa 200
The volume of the lower chamber, l 4
Fuel used

 firewood/briquettes/ 
wood chips (up to 20% moisture)

* Overall sizes are approximate.

** Heated space is approximate it depends on many factors such as heat loss through protective structures, ceiling height, presence of ventilation, dampness of firewood etc.

"Pyro Dnipro Aqua" hot water space heating pyrolysis oven is a high quality hot water space heating pyrolysis oven that complies with the strict EU flue emission limits, which greatly saves the environment.

"Pyro Dnipro Aqua" has a unique technology of gasification of wood - pyrolysis combustion, high efficiency of more than 90% without electronics and fan for secondary air. The water heat exchanger is separated from the inner wall of the combustion chamber by a channel for the exit of flue gases, and thus the furnace heats up quickly, complete combustion of the fuel occurs and the maximum possible combustion temperature is reached due to the fact that the water heat exchanger does not directly take heat from the combustion chamber. The advantage of this technical solution is the minimal effect of the water heat exchanger on the quality of combustion, i.e. the heat exchanger does not cool the combustion chamber of the furnace.

Advantages of pyrolysis ovens Pyro Dnipro Aqua:

- Highly efficient gasification of wood - pyrolysis combustion;

- Heater with automatic heat regulator;

- Two-chamber system of burning - a double flame;

- Automatic glass cleaning system "Air Wash" - self-cleaning glass;

- The minimum content of polluted substances in flue gases due to more complete combustion of fuel;

- Separate heat exchanger, affordable and easy cleaning;

- Large cargo space;

- Fast achievement of working temperature;

- Modern design;

- Ukrainian product, high quality;

Using:

- Residential premises - houses, apartments, cottages;

- Restaurants, cafes, enterprises;

Pyrolysis combustion:

After inflammation, wood (pyrolysis) gases are formed in the upper chamber. By closing the chimney damper of the upper chamber, the resulting pyrolysis gases enter the nozzle, where they are mixed with preheated secondary air and burned at high temperatures - up to 1000 degrees Celsius in the lower combustion chamber. A unique feature is that, unlike pyrolysis boilers, the combustion process occurs due to the natural draft of the chimney without a fan.

High efficiency:

The high efficiency of the furnace, more than 90%, is facilitated not only by the technology of perfect combustion in two chambers, but also by the design of the furnace, where flue gases are removed from the furnace through side openings along the perimeter of the inner wall of the water heat exchanger. In this way, maximum utilization of the heat exchanger surface is achieved. The furnace transfers the rest of the heat energy to the room in the form of radiant heat. The high efficiency of aqua-furnaces is confirmed by the difference between the combustion temperature in the lower chamber - about 1000 degrees Celsius and the flue gas temperature at the furnace outlet - about 170 degrees Celsius at the nominal heat output of the furnace.

All stoves are manufactured in accordance with the Technical Standard of Ukraine TU U 27.5-20866186-001:2015.

 

 

Why do customers choose us?

A wide selection of furnaces and boilers at producer prices
Own production

You get products directly from the factory, you can order individual equipment

Large assortment

You get products directly from the factory, you can order individual equipment

High product quality

You get products directly from the factory, you can order individual equipment

We deliver in Ukraine

You get products directly from the factory, you can order individual equipment

Order a Callback
We will contact you during the working day
Your Name
Your phone
The data will be used only for communication with you!
×
Оставить заявку
We will contact you during the working day
Your Name
Your E-Mail
Your phone
The data will be used only for communication with you!
×