Buleryan series "Techno" type 010

* Overall dimensions are approximate

** The volume of the heated room is indicated for a guideline, and depends on many factors, such as heat losses through enclosing structures, ceiling heights, ventilation, moisture in firewood, etc.

The buleryan stove allows you to heat any residential and industrial premises. The Buleryan stove runs on solid fuels such as briquettes, firewood and wood waste, etc. At the first stage, the fuel smolders and emits furnace gases, and at the second stage, the complete afterburning of the released combustion products occurs. Thanks to this technology of fuel combustion on one full load, the furnace can work up to 8 hours!

Buleryan stoves of the "Techno" series do not fundamentally differ from Buleryan "classic" stoves in combustion technology and design features of the furnace furnace.

Distinctive features are:

- thickened door - 8 mm;
- new fasteners on the doors, allowing you to adjust the tightness of the door to the oven;
- supply of primary air from below;
- due to fewer welded seams, Techno furnaces are more reliable in operation.

All furnaces are manufactured in accordance with TU U 27.5-20866186-001: 2015

All stoves of the Buleryan type and long-burning stoves are equipped with a patented flue gas afterburning system, which makes it possible to increase the heat output up to 20% with the same firewood consumption as compared to Buleryan stoves with a conventional secondary air supply.

All buleryans (ovens) can be additionally equipped with:

- stands;
- heat exchangers - the use of a heat exchanger will increase the heat output of the furnace, increase the efficiency and actually reduce the consumption of firewood;
- side panels;
- heat plates.