|
|
* Overall sizes are approximate. ** Heated space is approximate; it depends on many factors such as heat loss through protective structures, ceiling height, presence of ventilation, dampness of firewood etc. |
||||||||||||||||||||||||
|
|
 |
 |
|||||||||||||||||||||||
In
boilers long burning appliances used lower combustion that relates to
the most efficient and environmentally friendly type of wood burning. the boiler temperature is maintained at a stable level, so that the fuel is burned efficiently and with low power consumption. When the lower fuel combustion - lower emissions, better fuel is burnt
below the flue gas temperature at the outlet of a boiler and a
significantly higher efficiency - 86%.
For operation of the boiler does not need electrical power, ie the non-volatile boiler running on natural draft; temperature is regulated by a valve on the door of the boiler (primary air), also have the opportunity to adjust the secondary air.
The basic equipment of boiler includes: thermometer, pressure gauge and regulator traction.
It is possible to connect the boiler to electricity using heater 3-6.
The main advantages of continuous burning boilers TM "WD":
1. Pantophagy: the boiler can work with wood, sawdust, coal, briquettes, wood waste.
2. Unlike pyrolysis boilers working on wood with high humidity up to 45%
3. Long burn time on one tab from 6 to 15 hours.
4. High efficiency through the development of a heat exchanger, high temperature incinerator chamber of refractory bricks.
5. Energy independence. All boilers are equipped with thrust regulator and thermometer-pressure gauge.
6. The boiler has a high efficiency over a wide range: from 10 to 100% of the nominal capacity of the boiler, ie it is equally to be economically operated in the off-season (fall, spring) and in the winter, at low temperatures.
7. Large hopper for fuel.
8. The boiler is made of stainless steel sheets:
- Firebox and internal heat exchanger - 5 mm.
- The outer part of the boiler - 4 mm.
9. Easy cleaning t / o
10. High gas tightness.
11. A large cross-section of the loading hatch.
12. Three-way flue.
13. The movable grate.
For operation of the boiler does not need electrical power, ie the non-volatile boiler running on natural draft; temperature is regulated by a valve on the door of the boiler (primary air), also have the opportunity to adjust the secondary air.
The basic equipment of boiler includes: thermometer, pressure gauge and regulator traction.
It is possible to connect the boiler to electricity using heater 3-6.
The main advantages of continuous burning boilers TM "WD":
1. Pantophagy: the boiler can work with wood, sawdust, coal, briquettes, wood waste.
2. Unlike pyrolysis boilers working on wood with high humidity up to 45%
3. Long burn time on one tab from 6 to 15 hours.
4. High efficiency through the development of a heat exchanger, high temperature incinerator chamber of refractory bricks.
5. Energy independence. All boilers are equipped with thrust regulator and thermometer-pressure gauge.
6. The boiler has a high efficiency over a wide range: from 10 to 100% of the nominal capacity of the boiler, ie it is equally to be economically operated in the off-season (fall, spring) and in the winter, at low temperatures.
7. Large hopper for fuel.
8. The boiler is made of stainless steel sheets:
- Firebox and internal heat exchanger - 5 mm.
- The outer part of the boiler - 4 mm.
9. Easy cleaning t / o
10. High gas tightness.
11. A large cross-section of the loading hatch.
12. Three-way flue.
13. The movable grate.
All stoves are manufactured in accordance with the Technical Standard of Ukraine TU U 27.5-20866186-001:2015.
